how to not overload networks

Network Bandwidth

In Tower Networking Inc., all devices has a finite bandwidth capacity (unless you're playing in easy mode). When a device's bandwidth is exhausted, it cannot facilitate network traversals anymore and the effect is visible on the device either by physically looking at it or by using netsh routines such as watch.

The bandwidth capacity of a device can be inspected using net routine or the watch routine using the netsh application. If the network load is consistently at 100%, then the device is likely to be overloaded.

Risers also have bandwidth capacity, which are shown using the tower link application. It is shown as as the limit of utilization (traversals/tick). If the utilization consistently hits 100%, then the link is overloaded.